We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Finngard Silicone Protect
How much paint do I need?
The volume of paint required for a job is a simple calculation. Just divide the square metre measurement (m2) of the area to be painted by the spread rate of the paint you’re applying (m2/l).
If you’re applying two coats, double the area. If you’re working out volumes for a primer, one coat is usually sufficient.
You can use this coverage calculator to work out your volumes.
Frequently Bought Together
Finngard Silicone Protect
Finngard Silicone Protect is Tikkurila’s full-matt, water-based exterior coating.
This paint is highly resistant to fungi, moulds and algae! It has low water absorption properties allowing water to evaporate from the surface making it perfect for the Irish climate.
- Highly durable coating with low water absorption
- Surface is highly resistant to dirt, fungi, moulds and algae
- Tintable to a range of colours in the Facade colour card
- Brush, roll or spray apply
Coverage per litre (m2/l) | 9 |
---|---|
Surface Type | Masonry |
Brands | Tikkurila |
Interior/Exterior | Exterior |
Waterbased or Solventbased | Water Based |
Coverage | 6-9m²/l per coat depending on substrate |
Single/Two Pack | Single Pack |
Gloss Level | Matt (6-10%) |
Minimum Content | Minimum contents are the can size less 10% |
Recoat Time | Minimum 12 hours |
Touch Dry | 3 hours |