Finngard Silicone Protect

Dirt-Resistant Masonry Paint
As low as €8.97
In stock
Array
(
    [0] => 43
    [1] => 10
    [2] => 11
    [3] => 37
    [4] => 35
)
SELECT `main_table`.* FROM `srp_paintcolour_colour_management` AS `main_table` WHERE (`colour_status` = '1') AND (`category_id` IN('43', '10', '11', '37', '35')) GROUP BY `colour_code` ORDER BY find_in_set(category_id,'43,10,11,37,35') ASC
 
Add to Wish List

How much paint do I need?

The volume of paint required for a job is a simple calculation. Just divide the square metre measurement (m2) of the area to be painted by the spread rate of the paint you’re applying (m2/l).

If you’re applying two coats, double the area. If you’re working out volumes for a primer, one coat is usually sufficient.

You can use this coverage calculator to work out your volumes.

Do you know the type of the surface?
Do you know the size of the area? (m2)
Total required based on

Recalculate

Frequently Bought Together

  1. Finngard Silicone Protect
  2. +
  3. Onyx Series Captain Chunk Roller Kit - 9"
  4. +
  5. Finngard Uni Primer
  6. +
  7. Axus - Multitasker Brush
Total price: €0.00

Finngard Silicone Protect

€8.97
Array
(
    [0] => 43
    [1] => 10
    [2] => 11
    [3] => 37
    [4] => 35
)
SELECT `main_table`.* FROM `srp_paintcolour_colour_management` AS `main_table` WHERE (`colour_status` = '1') AND (`category_id` IN('43', '10', '11', '37', '35')) GROUP BY `colour_code` ORDER BY find_in_set(category_id,'43,10,11,37,35') ASC

Finngard Uni Primer

€45.83
Array
(
    [0] => 42
)
SELECT `main_table`.* FROM `srp_paintcolour_colour_management` AS `main_table` WHERE (`colour_status` = '1') AND (`category_id` IN('42')) GROUP BY `colour_code` ORDER BY find_in_set(category_id,'42') ASC

Finngard Silicone Protect

Finngard Silicone Protect is Tikkurila’s full-matt, water-based exterior coating.

This paint is highly resistant to fungi, moulds and algae! It has low water absorption properties allowing water to evaporate from the surface making it perfect for the Irish climate.

  • Highly durable coating with low water absorption
  • Surface is highly resistant to dirt, fungi, moulds and algae
  • Tintable to a range of colours in the Facade colour card
  • Brush, roll or spray apply
More Information
Coverage per litre (m2/l)9
Surface TypeMasonry
BrandsTikkurila
Interior/ExteriorExterior
Waterbased or SolventbasedWater Based
Coverage6-9m²/l per coat depending on substrate
Single/Two PackSingle Pack
Gloss LevelMatt (6-10%)
Minimum ContentMinimum contents are the can size less 10%
Recoat TimeMinimum 12 hours
Touch Dry3 hours
Write Your Own Review
You're reviewing:Finngard Silicone Protect
Your Rating