We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Finngard Uni Primer
How much paint do I need?
The volume of paint required for a job is a simple calculation. Just divide the square metre measurement (m2) of the area to be painted by the spread rate of the paint you’re applying (m2/l).
If you’re applying two coats, double the area. If you’re working out volumes for a primer, one coat is usually sufficient.
You can use this coverage calculator to work out your volumes.
Frequently Bought Together
Finngard Uni Primer
Finngard Uni Primer is Tikkurila’s water-based, acrylic primer for facades.
This primer is used to improve adhesion of the topcoat and also reduce absorption of the topcoat. It creates a fantastic base for painting while also strengthening the substrate to be painted.
Finngard Uni Primer can be tinted therefore helping with coverage before application of the topcoat.
- Available in 3L and 10L cans
- Tintable to a range of light colours
- Brush, roll or spray apply
Coverage per litre (m2/l) | 7 |
---|---|
Surface Type | Concrete, Masonry |
Brands | Tikkurila |
Interior/Exterior | Exterior |
Waterbased or Solventbased | Water Based |
Coverage | 6–8m²/l per coat depending on substrate |
Single/Two Pack | Single Pack |
Minimum Content | Minimum contents are the can size less 10% |
Recoat Time | Depends on many factors. See TDS |
Touch Dry | 5 hours |