We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Patio Paving Stain
Water-Based Paving Stain
As low as €20.71
In stock
How much paint do I need?
The volume of paint required for a job is a simple calculation. Just divide the square metre measurement (m2) of the area to be painted by the spread rate of the paint you’re applying (m2/l).
If you’re applying two coats, double the area. If you’re working out volumes for a primer, one coat is usually sufficient.
You can use this coverage calculator to work out your volumes.
Total required based on Recalculate
Patio Paving Stain
The stain can be applied using a brush, roller, or knapsack spray. A knapsack spray is the most efficient tool for applying stain on large surfaces. When using a knapsack spray, finish the treatment with a roller or brush, if needed, to ensure that the product penetrates into the substrate pores.
The stones will not be slippery, and they will retain their characteristic appearance.
The product is suitable for industrially dyed and uncolored concrete stones and slabs. Patio Paving Stain is not recommended for new garden stones or non-absorbing substrates such as washed concrete or natural stone.
| Coverage per litre (m2/l) | 6 |
|---|---|
| Surface Type | Concrete, Floor |
| Brands | Tikkurila |
| Interior/Exterior | Exterior |
| Waterbased or Solventbased | Water Based |
| Coverage | 4-8m²/l per coat. One coat is usually sufficient. |
| Single/Two Pack | Single Pack |
| Minimum Content | Minimum contents are the can size less 10% |
| Recoat Time | A few hours depending on conditions |
| Touch Dry | See data sheet |
Write Your Own Review
